在开始前BEFORE YOU START

注意!蚀刻片上有很多尖锐突起,故请在拼装时多加注意!整个拼装过程约需3-5分钟。
WARNING! Please handle the metal piece carefully, as the edges can be very sharp.
The whole process will need about 3-5 mins.
  • 12岁以下儿童不建议拼装本模型
    Children under 12 years old are not suggested to assemble this model
  • 无需任何胶水
    No glue needed
  • 在连接处前后折弯并掰断结点取下各部件
    Separate the metal pieces by twisting them gently back and forth to break the joints
  • 为避免断裂,在拼装时避免来回弯折金属片
    Avoid folding the metal piece back and forth repeatedly as it will weaken the joint and cause the
  • 请认真遵循步骤指示,以便折叠更为迅捷
    DO follow the instruction sequence, this will make the assembly much more straightforward
  • 观看成品照片,能更好理解拼装过程
    The photo of the final model should help you as a reference point in the assembling procedure

图例 / Legend:

深色区域为本步骤需移动的部分。
The dark area is the part needed to be moved in corresponding step.

虚线为向内折线。
Dash line is the inward folding line.

点划线为向外折线。
Dot line is the outward folding line.

  • 1
    沿虚线向内折弯15°
    Fold 15° inward according to the dash lines.
    注意!蚀刻花纹面朝下
    Attention! The etching pattern side face downward
  • 2
    沿点划线向外折弯10°
    Fold 10° outward according to the dotted lines.
  • 3
    沿点划线向外折弯15°
    Fold15° outward according to the dotted lines.
  • 4
    沿点划线向外折弯20°
    Fold 20° outward according to the dotted lines.
  • 5
    沿虚线向内折弯5°
    Fold 5° inward according to the dash lines.
  • 6
    沿虚线向内折弯5°
    Fold 5° inward according to the dash lines.
  • 7
    沿点划线向外折弯5°
    Fold 5° outward according to the dotted lines.
  • 8
    沿虚线向内折弯直到头部贴合,根据形态对折边做适当调整,最后在两边用圆形磁铁固定。
    Fold inward according to the dash line until the head pieces touch each other. Adjust the folding line accordingly then place the magnets on the eye holes and connect both pieces.
    完成!
    Finished!
技术支持:酷微科技